In 1 box - 220 spacers 

One spacer is with 2 dimensions: 10mm and 13mm 
 

Why use Brick tile spacers?

Brick tile spacers can aid in giving your job a professional finish (as well as providing a variety of style/design options for your customer) and have 2 dimensions 10 and 13mm. 

Special for “hand-moulding” brick tiles what have mostly different sizes/structure. 

Tile spacers allow you to achieve a consistent pattern when fixing wall brick tiles and help to ensure that all brick tiles are laid equidistant from each other (providing a symmetrical finish - as you or your customer would expect) in order for the grout to then be applied. 
 

What size brick tile spacers should I use? 

Selecting the size of spacer required for a job is often down to personal preference standard for brick tiles is between 10 and 13mm. 

Use for 1 brick-tile 2 spacer, left and right under the brick-tile (horizontal). 

Between the brick –tile (vertical) is it not necessary only for the dimension. 

Remove the spacers (using either your fingers or needle/snipe nosed pliers) after the brick tiles have been placed but before the adhesive fully seals. 


This time varies however it is usually 20-30 minutes (check the manufacturer information on the product packaging for accurate drying times). 

After you remove the spacer you can use them again. 

You can use 1 pack with 220 spacers/props for 8 m2 brick tiles depend what kind of brick tile you use.